Speech Recorder

Basic concepts of speech

Speech is a complex phenomenon. People rarely understand how is it produced and perceived. The naive perception is often that speech is built with words, and each word consists of phones. The reality is unfortunately very different. Speech is a dynamic process without clearly distinguished parts. It's always useful to get a sound editor and look into the recording of the speech and listen to it. Here is for example the speech recording in an audio editor.

All modern descriptions of speech are to some degree probabilistic. That means that there are no certain boundaries between units, or between words. Speech to text translation and other applications of speech are never 100% correct. That idea is rather unusual for software developers, who usually work with deterministic systems. And it creates a lot of issues specific only to speech technology.

In current practice, speech structure is understood as follows:

Speech is a continuous audio stream where rather stable states mix with dynamically changed states. In this sequence of states, one can define more or less similar classes of sounds, or phones. Words are understood to be built of phones, but this is certainly not true. The acoustic properties of a waveform corresponding to a phone can vary greatly depending on many factors - phone context, speaker, style of speech and so on. The so called coarticulation makes phones sound very different from their “canonical” representation. Next, since transitions between words are more informative than stable regions, developers often talk about diphones - parts of phones between two consecutive phones. Sometimes developers talk about subphonetic units - different substates of a phone. Often three or more regions of a different nature can easily be found.

The number three is easily explained. The first part of the phone depends on its preceding phone, the middle part is stable, and the next part depends on the subsequent phone. That's why there are often three states in a phone selected for speech recognition.

Sometimes phones are considered in context. There are triphones or even quinphones. But note that unlike phones and diphones, they are matched with the same range in waveform as just phones. They just differ by name. That's why we prefer to call this object senone. A senone's dependence on context could be more complex than just left and right context. It can be a rather complex function defined by a decision tree, or in some other way.

Next, phones build subword units, like syllables. Sometimes, syllables are defined as “reduction-stable entities”. To illustrate, when speech becomes fast, phones often change, but syllables remain the same. Also, syllables are related to intonational contour. There are other ways to build subwords - morphologically-based in morphology-rich languages or phonetically-based. Subwords are often used in open vocabulary speech recognition.

Subwords form words. Words are important in speech recognition because they restrict combinations of phones significantly. If there are 40 phones and an average word has 7 phones, there must be 40^7 words. Luckily, even a very educated person rarely uses more then 20k words in his practice, which makes recognition way more feasible.

Words and other non-linguistic sounds, which we call fillers (breath, um, uh, cough), form utterances. They are separate chunks of audio between pauses. They don't necessary match sentences, which are more semantic concepts.

On the top of this, there are dialog acts like turns, but they go beyond the purpose of the document.

Recognition process

The common way to recognize speech is the following: we take waveform, split it on utterances by silences then try to recognize what's being said in each utterance. To do that we want to take all possible combinations of words and try to match them with the audio. We choose the best matching combination. There are few important things in this match.

First of all it's a concept of features. Since number of parameters is large, we are trying to optimize it. Numbers that are calculated from speech usually by dividing speech on frames. Then for each frame of length typically 10 milliseconds we extract 39 numbers that represent the speech. That's called feature vector. They way to generates numbers is a subject of active investigation, but in simple case it's a derivative from spectrum.

Second it's a concept of the model. Model describes some mathematical object that gathers common attributes of the spoken word. In practice, for audio model of senone is gaussian mixture of it's three states - to put it simple, it's a most probable feature vector. From concept of the model the following issues raised - how good does model fits practice, can model be made better of it's internal model problems, how adaptive model is to the changed conditions.

The model of speech is called Hidden Markov Model or HMM, it's a generic model that describes black-box communication channel. In this model process is described as a sequence of states which change each other with certain probability. This model is intended to describe any sequential process like speech. It has been proven to be really practical for speech decoding.

Third, it's a matching process itself. Since it would take a huge time more than universe existed to compare all feature vectors with all models, the search is often optimized by many tricks. At any points we maintain best matching variants and extend them as time goes producing best matching variants for the next frame.

Other concepts used

A Lattice is a directed graph that represents variants of the recognition. Often, getting the best match is not practical; in that case, lattices are good intermediate formats to represent the recognition result.

N-best lists of variants are like lattices, though their representations are not as dense as the lattice ones.

Word confusion networks (sausages) are lattices where the strict order of nodes is taken from lattice edges.

Speech database - a set of typical recordings from the task database. If we develop dialog system it might be dialogs recorded from users. For dictation system it might be reading recordings. Speech databases are used to train, tune and test the decoding systems.

Text databases - sample texts collected for language model training and so on. Usually, databases of texts are collected in sample text form. The issue with collection is to put present documents (PDFs, web pages, scans) into spoken text form. That is, you need to remove tags and headings, to expand numbers to their spoken form, and to expand abbreviations.

What is optimized

When speech recognition is being developed, the most complex issue is to make search precise (consider as many variants to match as possible) and to make it fast enough to not run for ages. There are also issues with making the model match the speech since models aren't perfect.

Usually the system is tested on a test database that is meant to represent the target task correctly.

The following characteristics are used:

Word error rate. Let we have original text and recognition text of length of N words. From them the I words were inserted D words were deleted and S words were substituted Word error rate is

WER = (I + D + S) / N

WER is usually measured in percent.

Accuracy. It is almost the same thing as word error rate, but it doesn't count insertions.

Accuracy = (N - D - S) / N

Accuracy is actually a worse measure for most tasks, since insertions are also important in final results. But for some tasks, accuracy is a reasonable measure of the decoder performance.

Speed. Suppose the audio file was 2 hours and the decoding took 6 hours. Then speed is counted as 3xRT.

ROC curves. When we talk about detection tasks, there are false alarms and hits/misses; ROC curves are used. A curve is a graphic that describes the number of false alarms vs number of hits, and tries to find optimal point where the number of false alarms is small and number of hits matches 100%.

There are other properties that aren't often taken into account, but still important for many practical applications. Your first task should be to build such a measure and systematically apply it during the system development. Your second task is to collect the test database and test how does your application perform.

PARTS LIST R1 = 1k R2 = 470k R3 = 10k R4 = 5k1 R5 = 4k7 R6,7 = 100k R8,9 = 1M R10 = 10R C1-10 = 100nF/63V C11 = 47nF/63V E1,4 = 220uF/16V E2 = 4u7F/16V E3 = 22uF/16V IC1 = ISD2560 + socket IC2 =LM78L05 IC3 = LM386 + socket MIC = Condensator microphone S1,2 = Pushbutton (S1 = Start and Pause. S2 = Stop and Reset) S3 = Change-over switch Hψjttaler = 8R speaker

      The 2 pushbuttons = S1: Start/Pause. S2: Stop/Reset.

If you want to play your message, put S3 at Play. Then push S1 to start playing and again to pause.

If you want to delete your message press S2 twice.

If you want to record a message put S3 at Rec. Then push S1 to start and S2 to stop.

http://www.hubcity.net