Ringing phone light flasher

Description.

This circuit can be used to glow a bulb or turn a alarm when the phone rings.Using this circuit  nuissence of telephone ring at night can be avoided.

When the telephone rings the line voltage rises to 72 volts.At this time the LED in the opto-coupler glows and the transistor conducts. Due to this the transistor Q1 conducts.This makes the relay ON.The load connected to the relay whether bulb or bell turns ON.

Circuit diagram with Parts list. 

• Assemble the circuit diagram on a good quality PCB or common board.
• Use a 5V DC power supply for powering the circuit.
• The load can be connected through NC1,NC2 & C points of the relay.

http://www.hubcity.net